Siemens damper motor

Description

Smart motor damper model GLB 161-1E Siemens Siemens company has many products in the motor damper category.

Siemens damper motor mechanism

Siemens model GLB 161-1E damper motor is used to adjust and open and close dampers installed in ventilation and air conditioning facilities, and with features such as adjustable mechanical distance from 0 to 90 degrees, 2.5 volt ampere power consumption and 1.5W and self-aligning shaft adapter for use with 0-10V direct modulation controllers or three-position air damper or throttle controllers.

Application of Siemens damper motor

Motor dampers are used in the intelligentization of residential complexes, office centers, commercial centers, industrial centers, stores, etc. Also, heavy duty industrial damper motors are frequently used in power plants, petrochemical and oil and gas industries, the design of these dampers is extremely specific and accurate and they must be able to last in special weather conditions and not suffer from corrosion.

The advantage of Siemens damper motor

One of the reasons for using Siemens motor dampers is its very high lifespan, which includes 100,000 performance cycles. Due to the fact that Siemens motor dampers must comply with many standards, therefore, all these electric actuators of dampers are tested and enter the sales cycle after obtaining the necessary approvals. Due to the very high quality of Siemens motor dampers, this type of motor dampers does not need periodical inspections and their performance is always according to the commands sent from the control system.

Siemens damper motor components

These motor dampers include fiber-reinforced plastic body components in dimensions of 68x137x59.5 mm, mechanical and electrical position indicators, strong and brushless DC motors, driving motor and low-noise first-class gears without the need for maintenance. It is made without return spring with IP54 degree of protection, cable length of 0.9 meters, high resistance to harsh environmental conditions without the need for periodic maintenance and inspections, rotation angle of 90 degrees and torque of 10 Nm.